CMS 202 ki

With the Ethernet connection STOLL machines can be connected to standard networks for fast transmission of large quantities of data and remote access to other devices.

The pelerine spring-transfer needle with spring-loaded latch.

Benefits: it is characterized by low needle wear and a high level of safety during opening, closing, and transferring.

It enables different stitch lengths in a single knitting row.

Benefits: faster stitch density changes in the fabric and thus more pattern possibilities.

Split-stitch without the need of exchanging​ cams for all fine gauges available

Benefit: Less interruption times in the production

The needle bed is equipped with a racking device with a maximum racking course of 4" and a programmable racking speed.

Benefits: more pattern possibilities

The 1366x768-pixel wide view color display with multi-touch screen is practical and clear. The individual user interface and intuitive menu guide enable pattern changes to be entered easily and directly on the machine.

Benefits:
  - Improved legibility
  - Better usability with capacitive touch  (faster display reaction)
  - New gestures
  - Due to the possibility to access remotely to other devices (e.g. CREATE PLUS, PPS...), changes can be performed directly at the machine

Mirror and lighting for the belt take-down and fabrics in the storage area

Benefits: ergonomic solutions for machines with Belt take-down to simplify your daily work during production.

8 fold friction feed wheels on the right side.

To ensure a reduced, constant thread tension. An optimum yarn supply device for a maximum number of threads. 

  - BELT TAKE-DOWN: particularly for products with deep gores or with large width variation and special elastic properties.

Switch for turning the Belt take-down forwards and backwards:

Benefits: to make knitters' daily work easier and more productive.

With the oil drain container the oil is collected centrally without the need of additional vacuum cleaners or rags to clean the excess oil from the machine.
Consequently, it will be more environmentally friendly.

Individual thread holding and cutting via 12 clamping and cutting units on the right side of the machine.

An individual thread holding and cutting has the following benefits:
- easier and faster pattern programming
- more productivity in some fabrics

For a correct continuation of the knitting process after power failure.

Benefits: less damaged fabrics, less waste, less costs.

Thanks to the easy-to-reach USB port, important data can be transferred to the machine quickly and easily.

Communication between high-end feed-wheels  and STOLL-machines through a CAN-Open interface.

All STOLL machines are prepared with a CAN-Open interface.

Pattern creation with simplified development and accelerated programming.

Benefits: Accelerates the entire pattern development workflow.